windaDesign deliverables, checked against the code.
Discipline and lead engineers use it to turn a FEED package into datasheets, calculations and specifications, each traced to its inputs and ready to issue.
Winda Blueprint
Today and with Winda
From scattered FEED documents to 1 checked register.
- FEED documentProcess flow diagrams
- Process dataHeat and material balance
- StandardProject code register
- Owner templateDatasheet template
- FEED documentEquipment list
- Process dataSimulation case, winter
- StandardOwner specification
- Owner templateCalculation cover sheet
Winda BlueprintDeliverables to issue
- 01Vessel datasheet, glycol contactorShell and nozzles to ASME VIIIReady to issue
- 02Line sizing calculation, produced water headerVelocity and pressure dropIn check
- 03Relief valve datasheet, compressor dischargeSized to API 520In check
- 04Piping class sheet, carbon steel, class 600Built from the class tableFirst draft
- 05Cable schedule, main switchboard feedersSized from the load listFirst draft
Sample data
- 01 Today
Datasheets drafted by hand from the FEED, 1 discipline at a timeWith Winda BlueprintEvery datasheet drafted from the FEED and checked against the code - 02 Today
Interdisciplinary clashes found at the model reviewWith Winda BlueprintChanges carried to every affected deliverable as they happen - 03 Today
Code checks done late, under schedule pressureWith Winda BlueprintEach calculation run by an engineering engine and checked before issue
How it works
Agents prepare. Engines check. The discipline lead signs.
- InFEED package, process data, standards
- Agents prepareRead the FEED and draft every deliverable
- FEED Ingestion Agent
- Process Design Basis Agent
- Datasheet Agent
- Sizing and Calculation Agent
- Interdisciplinary Check Agent
- Engines checkSizes and code checksAligned to
- ASME VIII
- ASME B31.3
- SignsThe discipline lead
- OutDatasheets, calculations, specificationsIssued deliverableHeat exchanger datasheet
- Equipment
- Fuel gas heater
- Checks
- Duty, tubes and shell
- Format
- The owner's template
How the work is controlled
- Each agent uses approved tools and this project's data only.
- An independent checker agent re-checks the work.
- Engineering math comes from validated, deterministic engines.
- Every prompt, tool call and output is recorded.
- Agents never approve their own work.
See it run
A new FEED package, from first draft to signed datasheet.
Where it fits
Winda Blueprint takes the FEED package and feeds procurement.
- DesignEngineering designWinda Blueprint
- BuildIssued datasheets, to Procurement & bid evaluationProcurement & bid evaluationConstruction & handover
- OperateOperations & integrity
- ComplyCompliance & audit
- PlanRisk & insuranceAsset strategy
Agents
35 agents in 6 teams, aligned to the standards engineers use.
Each team, with the agents in it. Open a team to see what each agent does.
Bid and front end
4 agents
- Tender GapFinds gaps and contradictions between the tender and the FEED before pricing.
- Scope and EstimateBuilds the scope baseline and a class-rated cost estimate from the FEED.
- Standards MappingLists every code that applies and compares owner specifications with international editions.
- FEED IngestionReads the full FEED package and shows what is parsed and what is missing.
Design basis and calculations
10 agents
- Process Design BasisTurns FEED variables into structured data and drafts the process design basis.
- SimulationRuns process simulation cases on a working copy and produces heat and material balances.
- Sizing and CalculationSizes vessels, lines and wall thickness with validated engines.
- Relief and FlareBuilds relief scenarios and sizes the flare network.
- DatasheetGenerates process, mechanical, piping and instrument datasheets in the owner's template.
- Piping SpecBreaks class tables into piping specs and regenerates them when a class changes.
- Instrument IndexBuilds the instrument index, loop data and I/O list from the P&IDs.
- Electrical Load and CableBuilds load lists and sizes and schedules cables.
- Hazardous AreaClassifies hazardous areas from every release source.
- Structural LoadsPasses piping and equipment loads to structural design and checks them.
Integrity by design
6 agents
- Materials SelectionDrafts the materials selection report stream by stream, with evidence.
- Corrosion AssessmentModels corrosion rates, sets allowances and screens damage mechanisms.
- Corrosion Loop DesignMaps lines to damage mechanisms and builds the loops and the corrosion control document.
- CML and Monitoring DesignPlaces thickness monitoring locations and online probes during design.
- RBI MethodologyDefines the RBI method for owner review.
- Integrity Design BasisConsolidates design life, materials criteria and allowances into one basis.
Safety and environment
5 agents
- HAZOP / HAZID SupportPrepares nodes and worksheets and tracks every recommendation to closure.
- SIL and LOPA SupportCompiles safety instrumented functions and prepares LOPA data.
- Consequence and QRARuns dispersion, fire and explosion cases and builds the risk picture.
- Emissions by DesignEstimates flaring, venting and fugitive emissions for each design option.
- Environmental PermittingAssembles emission, discharge and impact data for permit applications.
Quality and change
5 agents
- Change PropagationAfter a revision, marks every affected document out of date and says why.
- Interdisciplinary CheckBuilds the cross-discipline check matrix and chases missing sign-offs.
- Design VerificationChecks each deliverable clause by clause against the applicable codes.
- 3D Model ReviewChecks the model for clashes, access and maintainability against the specs.
- Brownfield ModificationScopes changes to a running plant from its as-built record.
Project control
5 agents
- Document ControlDrives numbering, revisions and issue purpose from the deliverables list.
- ProgressCalculates progress from the real status of every document.
- ScheduleLinks deliverables to the schedule and flags the critical path.
- ReportingDrafts status reports, hold lists, comment responses and monthly reports.
- Lessons LearnedFinds lessons from reference projects that apply to this one.