All 204 AI agents.

Reads Tender documents, the FEED package, the project code registerHands over A gap list, a scope and estimate, and a standards map. The engineering manager approves.

• Tender Gap AgentFinds gaps and contradictions between the tender and the FEED before pricing.Aligned to Owner tender documents
• Scope and Estimate AgentBuilds the scope baseline and a class-rated cost estimate from the FEED.Aligned to AACE 18R-97
• Standards Mapping AgentLists every code that applies and compares owner specifications with international editions.Aligned to Project code register
• FEED Ingestion AgentReads the full FEED package and shows what is parsed and what is missing.Aligned to Deliverables list

Reads Process data, simulation files, design conditionsHands over Sized equipment, datasheets, indexes and load lists. The discipline lead signs.

• Process Design Basis AgentTurns FEED variables into structured data and drafts the process design basis.Aligned to Owner templates
• Simulation AgentRuns process simulation cases on a working copy and produces heat and material balances.Aligned to Process simulation practice
• Sizing and Calculation AgentSizes vessels, lines and wall thickness with validated engines.Aligned to ASME VIII, ASME B31.3
• Relief and Flare AgentBuilds relief scenarios and sizes the flare network.Aligned to API 520, API 521
• Datasheet AgentGenerates process, mechanical, piping and instrument datasheets in the owner's template.Aligned to Owner templates
• Piping Spec AgentBreaks class tables into piping specs and regenerates them when a class changes.Aligned to ASME B31.3
• Instrument Index AgentBuilds the instrument index, loop data and I/O list from the P&IDs.Aligned to ISA 5.1, ISA 20
• Electrical Load and Cable AgentBuilds load lists and sizes and schedules cables.Aligned to IEC 60364
• Hazardous Area AgentClassifies hazardous areas from every release source.Aligned to API RP 505, IEC 60079-10-1
• Structural Loads AgentPasses piping and equipment loads to structural design and checks them.Aligned to ASCE 7, AISC 360

Reads Process conditions, materials data, damage mechanismsHands over Materials selection, corrosion loops and the monitoring design. The materials engineer approves.

• Materials Selection AgentDrafts the materials selection report stream by stream, with evidence.Aligned to NACE MR0175 / ISO 15156
• Corrosion Assessment AgentModels corrosion rates, sets allowances and screens damage mechanisms.Aligned to API RP 571
• Corrosion Loop Design AgentMaps lines to damage mechanisms and builds the loops and the corrosion control document.Aligned to API RP 970, API RP 580
• CML and Monitoring Design AgentPlaces thickness monitoring locations and online probes during design.Aligned to API 570
• RBI Methodology AgentDefines the RBI method for owner review.Aligned to API RP 580, API RP 581
• Integrity Design Basis AgentConsolidates design life, materials criteria and allowances into one basis.Aligned to DNV-RP-G101, ISO 55001

Reads P&IDs, cause and effect data, emissions sourcesHands over HAZOP and LOPA support, consequence cases and permit inputs. The safety lead approves.

• HAZOP / HAZID Support AgentPrepares nodes and worksheets and tracks every recommendation to closure.Aligned to IEC 61882, ISO 17776
• SIL and LOPA Support AgentCompiles safety instrumented functions and prepares LOPA data.Aligned to IEC 61511
• Consequence and QRA AgentRuns dispersion, fire and explosion cases and builds the risk picture.Aligned to CCPS QRA guidelines, API RP 752
• Emissions by Design AgentEstimates flaring, venting and fugitive emissions for each design option.Aligned to API GHG Compendium, OGMP 2.0
• Environmental Permitting AgentAssembles emission, discharge and impact data for permit applications.Aligned to National EIA requirements

Reads Change requests, the 3D model, issued deliverablesHands over Checked changes carried to every affected deliverable. The lead engineer approves.

• Change Propagation AgentAfter a revision, marks every affected document out of date and says why.Aligned to Management of change
• Interdisciplinary Check AgentBuilds the cross-discipline check matrix and chases missing sign-offs.Aligned to IDC practice
• Design Verification AgentChecks each deliverable clause by clause against the applicable codes.Aligned to Applicable codes
• 3D Model Review AgentChecks the model for clashes, access and maintainability against the specs.Aligned to Model review practice
• Brownfield Modification AgentScopes changes to a running plant from its as-built record.Aligned to Management of change

Reads The deliverables list, progress data, the scheduleHands over Progress, schedule and lessons learned reports. The project manager approves.

• Document Control AgentDrives numbering, revisions and issue purpose from the deliverables list.Aligned to Project procedures
• Progress AgentCalculates progress from the real status of every document.Aligned to Earned value practice
• Schedule AgentLinks deliverables to the schedule and flags the critical path.Aligned to CPM scheduling practice
• Reporting AgentDrafts status reports, hold lists, comment responses and monthly reports.Aligned to Owner templates
• Lessons Learned AgentFinds lessons from reference projects that apply to this one.Aligned to Project history

Reads The datasheet, the requisition, vendor lists, market pricesHands over Requisitions, qualified vendor lists and clarification logs. The buyer approves.

• Requisition AgentDrafts requisitions from the current datasheet and records the revision used.Aligned to Datasheet revision control
• Vendor Qualification AgentPrequalifies vendors and keeps their performance history.Aligned to ISO 9001 supplier evaluation
• Market Price AgentBenchmarks quotes against steel, alloy and freight indexes.Aligned to Public price indexes
• Local Content AgentTracks in-country value commitments package by package.Aligned to National local content rules
• Clarification AgentRuns technical clarifications and ties each answer back to the requisition.Aligned to Requisition

Reads Every quote, clarification and contract termHands over Technical and commercial evaluations with a deviation register. The procurement manager awards.

• Technical Bid Evaluation AgentPulls every quote into one table and lists each deviation with its source.Aligned to Requisition
• Commercial Bid Evaluation AgentNormalizes price, terms and delivery into one comparable view.Aligned to Owner commercial rules
• Deviation Register AgentLogs vendor exceptions and tracks each one to accepted or rejected.Aligned to Requisition
• Contract Terms AgentFlags departures from the owner's standard terms before award.Aligned to Owner general conditions

Reads Vendor drawings, test reports, material certificatesHands over Reviewed vendor documents and a complete data book. The package engineer approves.

• Vendor Document Review AgentReviews vendor documents against the datasheet and requisition and merges comments.Aligned to Vendor document requirements
• Shop Inspection and FAT AgentPlans shop inspections and factory tests and tracks hold points and release.Aligned to ITP practice
• Material Certificate AgentChecks mill certificates against the specification.Aligned to EN 10204 3.1, API RP 578
• Vendor Data Book AgentCompiles the final vendor data book and links it to each tag.Aligned to Handover requirements

Reads Order status, shipping data, change noticesHands over Tracked packages, expediting actions and supply risk alerts. The expeditor confirms.

• Package Tracking AgentShows every package through its six stages, by discipline.Aligned to Procurement plan
• Change Impact AgentFlags every requisition and order built on a value that has since changed.Aligned to Management of change
• Expediting and Logistics AgentTracks delivery status and the risk of delay.Aligned to Delivery schedule
• Customs and Export Control AgentChecks classifications, licenses and sanctions for each shipment.Aligned to Export control regimes
• Supply Risk AgentWatches single sources, obsolescence and geopolitics, with Beacon signals.Aligned to Supplier risk practice
• Supplier Emissions AgentCollects supplier emissions and responsible-sourcing data.Aligned to GHG Protocol Scope 3

Reads Maintenance plans, stock levels, obsolescence noticesHands over Spares lists and stock recommendations. The materials manager approves.

• Spares and MRO AgentKeeps interchangeability records, startup spares and spare criticality.Aligned to ISO 14224
• Inventory Optimization AgentSets stock levels for critical spares by criticality and lead time.Aligned to ISO 14224
• Obsolescence AgentFlags parts going out of production and proposes alternates.Aligned to IEC 62402

Reads The RFQ package and its datasheetHands over A complete, checked submission. The vendor's own engineer signs it.

• RFQ Response AgentHelps vendors answer RFQs and clarifications completely, the first time.Aligned to Requisition
• Submission Check AgentChecks a vendor's documents against the requisition before they are submitted.Aligned to Vendor document requirements

Reads Weld maps, NDT results, coating checks, material receipts, test packsHands over Released inspection records per system. The QA/QC inspector releases them.

• Weld Traceability AgentChecks weld maps, welder IDs, procedures and qualifications against each other.Aligned to ASME IX, API 1104
• NDT Results AgentCollects RT, UT and PAUT reports and checks inspection ratios and repair rates.Aligned to ASME B31.3 Ch. VI, ASNT SNT-TC-1A
• Coating QC AgentChecks surface preparation, film thickness and holiday tests with photo evidence.Aligned to ISO 8501-1, ISO 19840, NACE SP0188
• Material Receiving AgentChecks certificates and verifies materials as they arrive on site.Aligned to EN 10204, API RP 578
• Bolted Joints AgentTracks assembly, torque and tensioning records joint by joint.Aligned to ASME PCC-1
• ITP and Release AgentTracks hold and witness points and releases inspected work.Aligned to ITP practice
• Pressure Test AgentChecks test packs are complete and records every test.Aligned to ASME B31.3 §345
• Field Observation AgentReads any site photo, spots defects, raises the non-conformance and assigns it.Aligned to Project quality plan

Reads Daily reports, progress data, change ordersHands over Progress reports and change records. The construction manager approves.

• Site Progress AgentMeasures installed quantities from photos, drone scans and daily reports.Aligned to Progress measurement rules
• Daily Report AgentTurns foreman notes and photos into the daily site report.Aligned to Project procedures
• Change Orders and Claims AgentLinks every site change to its cost, schedule and contract clause.Aligned to FIDIC, AACE 25R-03
• Site HSE AgentChecks permits to work, records toolbox talks and captures incidents.Aligned to ISO 45001

Reads System boundaries, punch lists, commissioning proceduresHands over Systems ready for commissioning and a baseline inspection. The completions engineer approves.

• System Completion AgentSplits the plant into systems and tracks mechanical completion.Aligned to CCPS RBPS
• Punch List AgentGrades punch items A, B and C and tracks closure evidence.Aligned to Completions practice
• Commissioning Procedures AgentDrafts pre-commissioning and commissioning procedures from the design.Aligned to Completions practice
• As-Built Reconciliation AgentCompares the built plant with the design model and records every difference.Aligned to ISO 55001
• Baseline Inspection AgentRecords baseline thickness at every monitoring point: day zero for every corrosion rate.Aligned to API 510, API 570, API 653

Reads Released records, safety-critical elements, operating limitsHands over The handover dossier, the first RBI plan and the maintenance system build. The owner accepts.

• Handover Dossier AgentBuilds the handover record tag by tag, so the owner receives searchable data.Aligned to Owner handover specification
• PSSR Evidence AgentGathers the evidence for the pre-startup safety review.Aligned to OSHA 1910.119(i)
• SCE Baseline AgentSets the performance baseline for every safety-critical element.Aligned to UK HSE SCE guidance
• IOW Setup AgentSets integrity operating windows from design intent and commissioning data.Aligned to API RP 584
• First RBI Plan AgentBuilds the first risk-based inspection plan and loads it into the CMMS.Aligned to API RP 580, API RP 581
• CMMS Build AgentLoads the asset register, maintenance plans and spares into the CMMS.Aligned to ISO 14224
• Operations Readiness AgentDrafts operating and emergency procedures and training material from the design.Aligned to CCPS RBPS

Reads Probe and coupon data, UT readings, process conditions, dosing recordsHands over Rate trends and dosing changes with their evidence. The corrosion engineer confirms.

• Corrosion Rate AgentFuses probes, coupons, UT and process data into one current rate per circuit.Aligned to NACE SP0775, API 570
• Chemistry AgentRecommends inhibitor, biocide and scale treatment and tracks injection availability.Aligned to API RP 571, operator practice
• Microbial Corrosion AgentReads biological and water-chemistry data to flag microbially influenced corrosion.Aligned to AMPP TM0212
• Cathodic Protection AgentReads rectifier, test post and survey data and checks protection criteria.Aligned to NACE SP0169, ISO 15589
• CUI AgentRanks corrosion under insulation risk and plans the screening.Aligned to API RP 583
• Environmental Cracking AgentScreens for sour cracking, HIC and high-temperature hydrogen attack.Aligned to NACE MR0175 / ISO 15156, API RP 941
• Erosion and Sand AgentAssesses sand production and erosion rates.Aligned to DNV-RP-O501
• External Coating AgentTracks external coating condition and breakdown risk.Aligned to AMPP coating standards

Reads The asset register, datasheets, P&IDs, the design basisHands over A complete risk basis for every item. The integrity engineer confirms.

• Asset Register AgentBuilds and maintains the asset hierarchy from the CMMS, P&IDs and documents.Aligned to ISO 14224
• Criticality AgentGrades asset criticality and updates it as data changes.Aligned to ISO 14224, API RP 580
• Damage Mechanism AgentScreens damage mechanisms circuit by circuit and keeps the corrosion control document current.Aligned to API RP 571, API RP 970
• IOW AgentMonitors integrity operating windows live and escalates by severity.Aligned to API RP 584
• SCE Assurance AgentKeeps safety-critical elements, performance standards and test records current.Aligned to UK HSE SCE, EI guidance

Reads The risk basis, inspection history, damage mechanismsHands over A risk-ranked inspection plan. The integrity engineer approves.

• RBI AgentRuns RBI and refreshes it as evidence arrives, explaining each risk driver.Aligned to API RP 580, API RP 581, DNV-RP-G101
• Inspection Planner AgentTurns risk into a plan: interval, scope, method and effectiveness.Aligned to API 510, API 570, API 653
• Tank Integrity AgentPlans tank inspections, floor scans and settlement checks.Aligned to API 653, EEMUA 159
• Pipeline Threat AgentAssesses each pipeline threat and identifies high-consequence areas.Aligned to ASME B31.8S, API 1160, 49 CFR 192/195
• Assessment Method AgentChooses between in-line inspection, pressure test and direct assessment.Aligned to NACE SP0502, SP0206, SP0208
• MAOP Verification AgentChecks that operating pressure records are traceable, verifiable and complete.Aligned to 49 CFR 192.624
• Relief Devices AgentSets relief device inspection intervals and keeps the records.Aligned to API RP 576
• Turnaround Scope AgentBuilds the turnaround inspection scope and sequence from the risk picture.Aligned to API RP 580

Reads Inspection reports, thickness data, NDT results, in-line inspection runsHands over Assessed findings and remaining life. The integrity engineer signs.

• Inspection Data AgentReads inspection reports in any format, maps them to monitoring points and calculates rates.Aligned to API 510, API 570
• CML Optimizer AgentAdds and removes monitoring points so every reading earns its place.Aligned to API 570
• ILI Analyst AgentAligns successive in-line inspections, matches features and calculates real growth.Aligned to API 1163
• NDT Signal Review AgentPre-screens PAUT, TOFD and guided-wave data for the certified reviewer.Aligned to ASNT SNT-TC-1A
• Anomaly Triage AgentRanks anomalies, sets response times and builds the dig list.Aligned to 49 CFR 195.452, 192.933
• Visual Inspection AgentReads drone, crawler and field photos to flag corrosion and coating defects.Aligned to Operator practice
• Fitness-for-Service AgentRuns Level 1 and 2 screening and prepares the full data package for Level 3.Aligned to API 579-1 / ASME FFS-1, B31G, DNV-RP-F101
• Remaining Life AgentProjects remaining life and risk with an uncertainty band.Aligned to API 579, API RP 581

Reads Findings, recommendations, change requestsHands over Work orders and change records. The maintenance planner releases them.

• Work Order AgentSends approved actions to the CMMS and tracks completion.Aligned to ISO 55001
• Repair Strategy AgentCompares repair options and keeps the temporary repair register.Aligned to ASME PCC-2
• Deferral AgentBuilds the risk case for deferring an inspection and routes it for approval.Aligned to API RP 580
• Management of Change AgentScreens every operating change for its effect on integrity.Aligned to OSHA 1910.119(l), EI PSM

Reads Failure history, maintenance records, condition dataHands over Maintenance strategies and bad actor lists. The reliability engineer approves.

• Rotating Equipment Health AgentReads vibration, temperature and oil data to predict failures.Aligned to ISO 20816, API 670
• Reliability Strategy AgentBuilds maintenance strategies by failure mode and keeps them current.Aligned to SAE JA1011, ISO 14224
• Bad Actors AgentFinds the equipment that fails and costs the most, and why.Aligned to ISO 14224
• Electrical Integrity AgentTracks thermography, protection tests and hazardous-area equipment inspections.Aligned to IEC 60079-17
• Turnaround Execution AgentTracks scope, progress and emergent work during the shutdown.Aligned to Operator practice

Reads Historian data, well tests, alarm logs, energy dataHands over Loss accounts and optimization cases. The process engineer approves.

• Production Loss AgentExplains every lost barrel and ranks the causes.Aligned to Operator practice
• Process Optimization AgentTests setpoint changes on a working copy of the process; operators decide.Aligned to Process simulation practice
• Energy and Flare AgentTracks energy use, flaring and venting, and finds reductions.Aligned to ISO 50001
• Operator Rounds AgentTurns field rounds into structured, checked readings.Aligned to Operator practice
• Alarm Management AgentReviews alarms against the philosophy and flags floods and stale alarms.Aligned to ISA 18.2, IEC 62682

Reads Structural surveys, subsea inspections, well integrity testsHands over Integrity status for every structure and well. The integrity engineer signs.

• Structural Integrity AgentPlans and assesses inspections of fixed offshore structures.Aligned to API RP 2SIM
• Mooring and Riser AgentManages mooring and riser integrity.Aligned to API RP 2MIM
• Subsea Integrity AgentPlans subsea inspections and reads flowline and equipment data.Aligned to DNV-RP-F116
• Well Integrity AgentTracks well barriers and manages annulus pressure.Aligned to ISO 16530-2, NORSOK D-010, API RP 90

Reads Leak surveys, LDAR data, loss of containment eventsHands over Leak and emissions records. The HSE lead confirms.

• Leak Detection AgentTriages leak detection alarms and manages the program.Aligned to API RP 1175
• Methane and LDAR AgentTreats every leak as an integrity event and supports methane measurement and reporting.Aligned to EU 2024/1787, EPA OOOOb/c, OGMP 2.0
• Loss of Containment AgentClassifies and trends process safety events.Aligned to API RP 754

Reads Incident reports, KPIs, lessons learnedHands over Root causes, KPI packs and lessons. The integrity manager approves.

• Incident and RCA AgentRuns structured investigations and checks sister assets for the same cause.Aligned to CCPS RBPS
• Barrier Health AgentKeeps bow-tie barriers live against real inspection and test results.Aligned to CCPS bow-tie guidance
• Integrity KPI AgentTracks the AIMS sustain criteria and prepares the management review.Aligned to ISO 55001 9.3
• Knowledge Capture AgentCaptures the reasoning of senior engineers so it stays when they retire.Aligned to Operator practice

Reads Regulations, permits, standards, project gatesHands over A current obligation register with owners. The compliance lead approves.

• Obligation Register AgentBreaks regulations, owner specifications and standards into asset-level obligations.Aligned to 49 CFR 192/195, COMAH 2015, UK SCR 2015, NOC codes
• Regulatory Change AgentWatches rules and standards and shows what each change touches.Aligned to API, ASME, ISO, AMPP, regulators
• Permit Conditions AgentTracks every condition in air, water and operating permits.Aligned to Permit conditions
• Gate Readiness AgentShows live readiness against the 30 AIMS gate criteria, in each operator's vocabulary.Aligned to API RP 580/581, ISO 55001, EI PSM, DNV-RP-G101

Reads Inspection, maintenance, training and HSE recordsHands over Evidence matched to every obligation, with gaps flagged. The record owner confirms.

• Evidence Collector AgentPulls the proof for each obligation straight from the record.Aligned to Obligation register
• Records Retention AgentKeeps each record as long as its rule requires.Aligned to ISO 15489
• Competence Records AgentTracks certifications and training for every safety-critical role.Aligned to API ICP, ASNT, OPITO

Reads The obligation register, evidence, past findingsHands over Audit packs, findings and corrective actions. The compliance lead signs.

• Audit Pack AgentRebuilds the decision trail on demand and compiles a sourced audit pack.Aligned to ISO 19011
• Findings and CAPA AgentTracks audit findings to closed corrective actions.Aligned to ISO 55001 cl. 10
• Management System Audit AgentAudits against ISO 55001, 14001, 45001 and 9001 in one pass.Aligned to ISO 19011
• Maturity Assessment AgentScores maturity from L1 to L5 and builds the plan to close each gap.Aligned to ISO 55001

Reads Evidence, emissions data, management system recordsHands over Regulator reports, disclosures and partner views. The asset manager approves.

• Regulatory Reporting AgentDrafts annual reports, incident reports and regulator KPIs.Aligned to PHMSA forms, national requirements
• Emissions Reporting AgentPrepares methane monitoring, reporting and verification submissions.Aligned to OGMP 2.0, EU 2024/1787, EPA Subpart W
• Sustainability Disclosure AgentFeeds integrity and emissions data into sustainability reports.Aligned to IFRS S2, ESRS
• Management Review AgentPrepares management review inputs.Aligned to ISO 55001 9.3
• Partner Assurance AgentGives non-operating JV partners the assurance pack their rights allow.Aligned to JOA practice
• Regulator View AgentGives regulators permissioned, read-only access to the evidence they request.Aligned to National regulator requirements
• Class and Certification AgentPrepares surveys and evidence for class societies and certifying bodies.Aligned to Class society rules

Reads Integrity data, barrier tests, hazard studiesHands over Quantified loss scenarios and a current risk register. The risk manager approves.

• Risk Quantification AgentTurns RBI consequences into money: damage, downtime and portfolio exposure.Aligned to API RP 581
• Loss Scenarios AgentBuilds major loss scenarios and estimates the maximum loss.Aligned to Insurer engineering practice
• Business Interruption AgentEstimates downtime and lost margin for each scenario.Aligned to Insurer engineering practice
• Natural Hazards AgentScreens assets for hurricane, flood and seismic exposure.Aligned to ASCE 7, API RP 2MET
• Risk Register AgentKeeps the enterprise risk register tied to live asset data.Aligned to ISO 31000

Reads The risk picture, survey recommendations, claims historyHands over Underwriting submissions and loss prevention plans. The risk manager submits.

• Underwriting Submission AgentAssembles the risk engineering evidence insurers ask for at renewal.Aligned to Insurer survey practice
• Loss Prevention AgentTracks every insurer recommendation to closure.Aligned to Insurer survey practice
• Claims Support AgentAssembles the evidence and timeline a claim needs.Aligned to Policy wording
• Insurer Portfolio AgentGives insurers an engineering view across the assets they cover.Aligned to Insurer engineering practice

Reads Integrity data, project milestones, warranty termsHands over Lender reports and warranty evidence. The finance lead approves.

• Lender Reporting AgentPrepares construction and operations reports for the lenders' independent engineer.Aligned to Independent engineer practice
• Marine Warranty AgentPrepares evidence for marine warranty surveys of offshore installation and tows.Aligned to DNV-ST-N001
• Guarantees and Warranties AgentTracks equipment warranties and performance guarantees against actual performance.Aligned to Contract terms

Reads Asset records, capex plans, benchmarksHands over Portfolio scenarios, benchmarks and valuations. The portfolio manager approves.

• Portfolio and Capex AgentAllocates the integrity budget by risk and builds the asset management plan.Aligned to ISO 55001
• Scenario Planning AgentTests the plan against price, demand and regulation scenarios.Aligned to Planning practice
• Benchmarking AgentCompares cost and performance with peer assets, from public data.Aligned to Public data only
• Asset Valuation AgentValues the asset with its real integrity spend and remaining life.Aligned to International Valuation Standards

Reads Remaining life, condition data, market casesHands over Life extension, conversion and expansion cases. The asset manager approves.

• Life Extension AgentCombines remaining life, aging and obsolescence into a life extension case.Aligned to UK HSE KP4, API 579
• Repurposing AgentTests pipelines and plant for hydrogen or CO2 service.Aligned to ASME B31.12, DNV-RP-F104, ISO 27913
• Debottleneck and Expansion AgentTests how far the existing asset can go before it needs new steel.Aligned to Applicable design codes
• Transition Pathway AgentRanks emission cuts by cost per tonne across the asset's remaining life.Aligned to Marginal abatement cost practice

Reads The asset's full record, integrity liabilitiesHands over Technical due diligence and a sell-side data room. The transaction lead approves.

• Technical Due Diligence AgentReads a data room and finds hidden integrity liabilities.Aligned to Due diligence practice
• Sell-Side Data Room AgentPrepares a technical data room buyers can trust.Aligned to Due diligence practice

Reads Well and facility records, decommissioning estimatesHands over Decommissioning and plug and abandonment plans with their liabilities. The asset manager approves.

• Decommissioning and ARO AgentScopes decommissioning and estimates the retirement liability.Aligned to OEUK guidelines, IAS 37, ASC 410
• Well P&A Planning AgentPlans plug and abandonment scope and cost, well by well.Aligned to OEUK well guidelines, NORSOK D-010

Reads Documents, drawings, datasheets, sensor data, work ordersHands over Every record kept as it was and traced to its source.

• Connectors AgentReads CMMS, historians, ERP and document libraries where they already live.Aligned to Open industrial interfaces
• Document Reader AgentReads scans, drawings and handwriting, in any language.Aligned to Document control practice
• Drawing Digitizer AgentTurns P&IDs and isometrics into connected, searchable tags and lines.Aligned to ISO 10628, ISA 5.1
• Data Quality AgentFinds gaps, duplicates and conflicts, and shows which source wins.Aligned to ISO 8000
• Lineage AgentTies every value to its source page, revision and author.Aligned to Records management practice

Reads Records from asset data, standards, engineering rulesHands over 1 linked model, with validated engines doing the math.

• Tag Linker AgentConnects every tag across documents, systems and years.Aligned to ISO 14224, CFIHOS
• Asset Model AgentBuilds the hierarchy, systems, loops and circuits as one graph.Aligned to ISO 14224, ISO 15926
• Standards Library AgentTurns code clauses into rules the engines can check.Aligned to API, ASME, AMPP, ISO, DNV
• Engine Runner AgentCalls validated engines and records every input and output.Aligned to API 579, B31G, API RP 581, process simulation

Reads A task and its approval routeHands over Checked work routed to the person who signs, with every step recorded.

• Orchestrator AgentBreaks a task into steps and gives each to the right specialist.Aligned to Bounded autonomy
• Checker AgentRe-checks another agent's work before any person sees it.Aligned to Prepare, check, approve
• Guardrails AgentKeeps each agent inside its tools, data and confidence limits.Aligned to ISO/IEC 42001
• Approval Router AgentSends each draft to the person who signs, with the evidence attached.Aligned to Prepare, check, approve
• Audit Trail AgentRecords every prompt, tool call and output, watermarked.Aligned to ISO/IEC 42001

Reads Questions, photos and voice notes from the fieldHands over Answers with sources, morning briefs and approvals.

• Ask AgentAnswers any question about the asset, with sources.Aligned to Answers with citations
• Briefing AgentPrepares each person's morning brief for their role.Aligned to Role-based access
• Translate AgentWorks in English, Arabic, Chinese, Japanese and more, keeping engineering terms exact.Aligned to Project glossary
• Field Mate AgentTakes voice notes and photos in the field, offline when needed.Aligned to Field data capture

Reads Public incident reports and investigationsHands over Incident briefs and pattern reviews. Editors approve each brief.

• Incident Tracker AgentOpens and updates a story thread for every reported incident.Aligned to Public sources
• Source Check AgentChecks every causal claim against official investigations.Aligned to PHMSA, CSB, NTSB
• Editor's Draft AgentDrafts the daily brief for the human editor to approve.Aligned to Beacon editorial policy

Reads Public flow, outage and regulatory dataHands over Outage outlooks with a likely duration range.

• Outage Watch AgentDetects outages from public filings, notices and flows.Aligned to Public data only
• Restart Pathway AgentMaps what regulators require before restart, and how long it took before.Aligned to Regulatory precedent
• Read-Across AgentFinds assets of the same age, material and mechanism that may be next.Aligned to Public data only
• Market Context AgentPlaces each outage in its supply and flow context.Aligned to Public data only